Picture Name

Products

PRODUCT CENTER

LH1504 composite insulated waterproof tape
LH1504 composite insulated waterproof tape
+
  • LH1504 composite insulated waterproof tape
  • LH1504 composite insulated waterproof tape

LH1504 composite insulated waterproof tape

1, model description ● Specifications: 1.8mm × 50mm × 3m ● Color: Black ● Appearance: double-layer structure (composed of high-performance elastic insulation material and waterproof sealant), in rolls ● Working conditions: -40 ~ 80 ° C

Category: Product Center

Key words: equipment


Product Description

1, model description
● Specifications: 1.8mm × 50mm × 3m
● Color: Black
● Appearance: double-layer structure (composed of high-performance elastic insulation material and waterproof sealant), in rolls
● Working conditions: -40 ~ 80 ° C
2, product characteristics
It has good self-fluxing and can be applied to special waterproof and moisture-proof insulation sealing places. It is easy to stretch and wrap, and has strong plasticity. It is very convenient for covering irregular joints and forms extrusion and compacting effect. It can be used for outdoor operation and used with PVC tape.
3, the main application
Communication equipment base station, antenna, feeder and other joints waterproof and insulation protection; communication cable end and joint waterproof seal; urban distribution network transformation, overhead insulated wire connection, branch line clamp waterproof sealing insulation; underwater submersible motor Cable joint treatment, joint treatment of urban streetlights with geo-cables; mines, oilfields, and chemical power facilities cannot use open fires.
4, instructions for use
Clean dust, oil and other debris at the cable joints; unfold the tape, peel off the release paper and stretch the tape until the width is narrowed to 1/2 to 3/4; keep the tape at a certain tensile strength of 1/ 2 Wrapping and wrapping in an overlapping manner; after winding, it is advisable to squeeze the tape at the covered portion by hand so that the interlayer is adhered tightly without air gap for sufficient bonding (note that the fingertip is prevented from breaking the tape); If the environment is subject to wear and tear, use PVC tape on the outer layer; if necessary, divide the waterproof tape into different specifications to suit other places.
5, technical parameters
Test items Typical parameters Executive standard
Tensile Strength ≥2.0MPa GB/T 528-2009
Elongation at break ≥800% GB/T 528-2009
Volume resistivity ≥1×1014Ω·cm GB/T 1692-2008
Breakdown strength ≥20KV/mm GB/T 1695-2005
Dielectric constant 2-4 GB/T 1693-2007
Peel strength ≥2N/mm GB/T 2790-1995
Self-sticking No loose Q/CCJN-06-2001